Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== -/CV_DATIL - Vector $D6 ====== This vector converts date and time into a long integer. ^Call Parameters^^Return Parameters^^ |D1.L|Unused |D1.L|Date.| |A1.L|Pointer to buffer. |A1.L|Corrupted.| ===== Errors ===== No errors are returned by this vector call. ===== Notes ===== * All registers not shown above are not used on entry and are preserved on exit. * This routine works on SMSQ but not on a standard QL. * A1 points to a buffer six words long containing year, month, day, hour, minute and second. * D1.L contains the date in the usual long word format. ===== Example ===== The example below shows the use of this vector. <code> dte dc.w 2009 ; Year dc.w 2 ; Month dc.w 24 ; Day dc.w 10 ; Hour dc.w 57 ; Minute dc.w 0 ; Second Get_dt lea dte,a1 ; Date in year, month etc form. move.w CV_DATIL,a2 ; CV_DATIL vector address. jsr (a2) ; Set date in D1.L. </code> qdosmsq/vectors/datil.txt Last modified: 2009/02/25 11:02by george.gwilt