WM.MSECT - Vector $48

In a pannable or scrollable application window, the panning and scrolling can be operated by clicking on the arrows or by keys pressed while the pointer is in the application sub-window. This vector returns relevant information.

Call ParametersReturn Parameters
D0.L 0 or pan/scroll item number
D1.Lx,y, pointer position (absolute) D1.LPreserved
D2.B Uppercased keystroke D2.L Preserved
D3.L x,y section number or -1
D4.B Event number of keystroke D4.B Preserved or pt..pan or pt..scrl
A0.L Channel ID of window A0.L Preserved
A3.L Pointer to sub-window definition A3.L Preserved
A4.L Pointer to working definitionA4.LPreserved

None - but see Notes

  • All registers not mentioned above are not used and preserved.
  • If a pan/scroll event is detected D0.W contains the information in an "item number". See the table below. Otherwise D0 is zero.
  • If an event is detected D4.B is set to pt..pan ($A) for a pan event and pt..scrl ($B) for a scroll event.
  • The event is caused either by activating the pan/scroll arrows, in which case D3.L is set to -1, or by keystrokes in which case D3 contains the x,y section number.
  • If the window is not split, both x and y sections are zero. If there are n splits in either the x or y direction there will be n+1 sections numbered 0 to n.
Item Number

The code indicating the event is in the upper byte of D0.W. D0.B contains the section number.

$70Up arrowsHITALT/UP
$74Up arrowsDOALT/SHIFT/UP
$71Down arrowsHITALT/DOWN
$75Down arrowsDOALT/SHIFT/DOWN
  • qdosmsq/pe/vectors/msect.txt
  • Last modified: 2011/10/02 16:30
  • by george.gwilt